/* Wi-Fi STA Connect and Disconnect Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <WiFi.h>
const char* ssid = "wifi-ssid";
const char* password = "wifi-password";
int btnGPIO = 0;
int btnState = false;
void setup() {
Serial.begin(115200);
delay(10);
// Set GPIO0 Boot button as input
pinMode(btnGPIO, INPUT);
// We start by connecting to a WiFi network
// To debug, please enable Core Debug Level to Verbose
Serial.println();
Serial.print("[WiFi] Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
// Auto reconnect is set true as default
// To set auto connect off, use the following function
// WiFi.setAutoReconnect(false);
// Will try for about 10 seconds (20x 500ms)
int tryDelay = 500;
int numberOfTries = 20;
// Wait for the WiFi event
while (true) {
switch (WiFi.status()) {
case WL_NO_SSID_AVAIL:
Serial.println("[WiFi] SSID not found");
break;
case WL_CONNECT_FAILED:
Serial.print("[WiFi] Failed - WiFi not connected! Reason: ");
return;
break;
case WL_CONNECTION_LOST:
Serial.println("[WiFi] Connection was lost");
break;
case WL_SCAN_COMPLETED:
Serial.println("[WiFi] Scan is completed");
break;
case WL_DISCONNECTED:
Serial.println("[WiFi] WiFi is disconnected");
break;
case WL_CONNECTED:
Serial.println("[WiFi] WiFi is connected!");
Serial.print("[WiFi] IP address: ");
Serial.println(WiFi.localIP());
return;
break;
default:
Serial.print("[WiFi] WiFi Status: ");
Serial.println(WiFi.status());
break;
}
delay(tryDelay);
if (numberOfTries <= 0) {
Serial.print("[WiFi] Failed to connect to WiFi!");
// Use disconnect function to force stop trying to connect
WiFi.disconnect();
return;
} else {
numberOfTries--;
}
}
}
void loop() {
// Read the button state
btnState = digitalRead(btnGPIO);
if (btnState == LOW) {
// Disconnect from WiFi
Serial.println("[WiFi] Disconnecting from WiFi!");
// This function will disconnect and turn off the WiFi (NVS WiFi data is kept)
if (WiFi.disconnect(true, false)) {
Serial.println("[WiFi] Disconnected from WiFi!");
}
delay(1000);
}
}